Перейти к информации о продукте
1 из 7




Обычная цена €650,00
Обычная цена Цена со скидкой €650,00
Распродажа Продано
Сумма налога включена. Стоимость доставки рассчитывается при оформлении заказа.

Aquarium: 200-1500L / 18-36w / 4500L/H / maxhead 79-200cm / 36x36x55.5cm

4 basket 3.6L / Bucket 15.9L / Diameter of hose: 19/25mm

The Hypermax has a huge 4.2 gallon filtration capacity. This, together with the most efficient, energy-efficient and electronically controlled pump on the market, determines the ability to handle aquariums with large capacities: from 50 to 400 gallons. A set of 2 inlet hoses and 2 outlet hoses ensure adequate water circulation throughout the aquarium, effectively preventing dead zones from forming in the aquarium.

Aquael products guarantee a high level of safety in use. Firstly, the Hypermax is powered by a safe 24 volt operating voltage, which does not pose a risk to human life and health. Secondly, in the event of a rotor blockage, the device will automatically shut down, thus preventing the escalation of the consequences of the failure. In addition, we will be notified of the event by an audible signal and pulse LED lights. The Hypermax will react in the same way in case the rotor in the engine compartment is missing.

You can be confident in the operation of the Hypermax, even if you are a beginner. Our designers have ensured that its use is comfortable and intuitive in every detail: from the easy-to-use control panel to the wheels that allow you to move the device comfortably. They also implemented proven and patented functions, previously used in ULTRAMAX filters with great appreciation. These include a profiler and systems: double ball valves and filter self-flooding. These solutions have received positive feedback from hobbyists for years. We are confident in their reliability.

The spacious 0.4 gal profile integrated into the cover of the device effectively retains large impurities, which significantly reduces the frequency of filter maintenance. Cleaning the profiler itself is very simple and doesn't even require removing the device from the cabinet. Simply lift the lid, remove the sponge from the basket and rinse with running water.

Aquarium hobbyists know that a critical stage of the job that requires access to the inside of the filter is usually disconnecting the inlet and outlet hoses from the device. The remaining water in the filter is usually spilled on the floor, which causes justifiable irritation. To prevent this, the Hypermax uses a patented double ball valve system. They simultaneously close the inlet and outlet of the filter in the lid and lumen of the hoses and prevent the water from escaping uncontrollably.

All you need to do is 2 to 4 movements of the piston and you are ready to go.

The filter will be flooded with aquarium water.

A set of accessories necessary to install and start the filter includes:
- hoses, elbows, overflow hoses; sprinkler system, cartridges for filter media baskets:

STANDARD SPONGE 10 PPI sponge profiler.

- 2 empty filter media baskets - for filling according to the needs of your aquarium. We recommend that you choose filter media from our wide range:

BioCeraMAX 600;, BioCeraMAX 1200, BioCeraMAX 1600, CarboMAX Plus, ZeoMAX Plus, NitroMAX Pro, PhosMAX Pro.

Просмотреть всю информацию