HANDSCAPING FOAM 750ml - 900g

Safe foams for decorating aquariums and terrariums.
Transform your aquariums and terrariums with Hardscaping foam!
This high-tech polyurethane foam is designed to enhance the ecological landscaping.

Application

Shake the can vigorously for at least 30 seconds to thoroughly mix the ingredients.

Attach the nozzle: Securely connect the supplied application nozzle or straw to the can's valve.

Test spray: Perform a test spray on a piece of scrap material to familiarize yourself with the flow rate and expansion properties of the foam.

Apply the foam: Hold the can upside down and press the trigger to release the foam.

Fill the gap by applying the foam slowly, filling approximately 50% of the space to allow for expansion.

For best results, apply the foam in layers, allowing each layer to expand and harden before applying the next.

Allow to cure: Let the foam cure according to the manufacturer's instructions, typically ranging from a few hours to overnight. Avoid touching the foam during this time.

Trimming: Once cured, use a utility knife to remove any excess foam. Sanding: If a smoother finish is desired, lightly sand the foam after trimming.

Cleaning the nozzle: Clean the application nozzle immediately after use with acetone or the recommended solvent to prevent clogging.

Disposal: Dispose of the empty container and any used materials in accordance with local regulations.

Safety advice

Ventilation: Use the foam in a well-ventilated area to avoid inhaling fumes. Fire safety: Keep the foam away from open flames and sources of ignition, as it is flammable.

Storage: Store containers in a cool, dry place, away from direct sunlight and extreme temperatures.